hardox 500 plates supplier
drilling hardox 500 plate, hardox 600 wear plate manufacturer in india
hardox 500 plate for sale, buy welding hardox 500 plate, hardox 600 plate at lowest price in India
with a nominal hardness of 500 HBW Hardox 500 is a weldable and bendable abrasion-resistant steel which is Suitable for applications where demand higher wear resistance.while maintaining good processability and toughness, Hardox® 500 increases payload and increases service life.Hardox 500 Plate can easily welded and bended. These plates is widely used in various applications that require higher wear resistance and are resistant to abrasion. intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties
Hardox 500 Plates Supplier
Hardox 600 Wear Plate
Drilling Hardox 500 Plate
Are you looking to buy Hardox 500 Wear Resistant Plate from Hardox 500 Plate Supplier In Uae, USA, Australia, Canada, UK, Houston, Singapore, South Africa or Indonesia?
Table of Content
- Hardox 500 Plate Specification
- Hardox 500 Plate Price
- Hardox Plate Suppliers
- Abrex 500 Plate Sizes
- Hardox 600 Wear Plate Weight Calculator
- AR500 plate Stock
- Hardox 500 Steel Plate Processing
- Welding Hardox 600 Plate Applications
- Hardox 500 Abrasion Resistant Plate composition
- AR600 plate mechanical properties
Check cost of hardox 500 plate. Hardox 600 Plate Suppliers In India, Request a free sample of Welding Hardox 600 Plate
hardox 500 offers very good weldability.hardox 600 is the tough and extra hard steel for extreme wear.Hardox® 600 has a uniquely high impact toughness, At a nominal hardness of 600 HBW.it can still be welded and cut , for high-performance applications making it an excellent choice.Despite its high hardness it can still be cut and welded.
All india metal corporation is Hardox 500 Plates Supplier, in our warehouse you’ll find a large inventory of Hardox 500 Plates, Hardox 600 Plates at very low price in Mumbai, India. since 15 years suppliers of Drilling Hardox 500 Plate in india in various sizes & finishes. All india metal corporation is finding for more Stockholders in Middle East, Europe, Africa, Far East Asia to sell our Hardox 600 Wear Plate . so mail to info@allindiametal.com to become our authorised dealer & distributor of Hardox 500 Plate For Sale in your country.We maintain stock & supply Welding Hardox 500 Plate to more than 60 locations Offer A wide range of Hardox 600 Plate in all sizes including 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm etc with Hot rolled plate (HR), Cold rolled sheet (CR), 2D, 2B, SATIN (Met with Plastic Coated), BA NO(8) finish.
Custom size supplied of hardox 500 wear plate in Rajkot, Maharashtra, Rajasthan, Chennai, Delhi, Vadodara, Jaipur, Indore, Karnataka, Ludhiana, Bangalore, Pune, Haryana, Raipur, Ahmedabad, Gurgaon, Kolhapur, Chhattisgarh Faridabad, Nagpur Gujarat, Kolkata, Punjab, Aurangabad, Karnataka, Khopoli, Ghaziabad, Bhosari, West Bengal, Madhya Pradesh, Tamil Nadu, Uttar Pradesh. you can buy our material of 500 HBW Hardox plates in Korea, Australia, Tanzania, Kenya, Zimbabwe, Bangladesh, Mayanmar, Indonesia, Peru, UAE, Spain, Ethiopia, Vietnam, Ghana, Singapore, Argentina, Taiwan, France, Philippines, Thailand, Nigeria, Angola, Mexico, Qatar, Israel, UK, Germany, Kuwait, Malaysia, Senegal, Oman, Italy, Japan, Austria, China, USA, South Africa, Saudi Arabia (KSA),Trinidad And Tobago for lowest price. find free sample of abrex 500 plate. call us or mail to info@allindiametal.com for hardox 500 steel plate price List.
Know the Actual Price of hardox 500 abrasion Resistant Plate before you buy hardox 500 plate suppliers in mumbai. make an enquiry for hardox 600 Abrasion Resistant Steel Plates to check types & sizes because if your sheet type, finish, grade and size matches with our huge inventory we can give you at low hardox 600 plate price list . you can mail to info@allindiametal.com for abrex 600 plate suppliers
Call Now For welding hardox 600 plate free sample
Specifications |
ASTM / ASME
|
Size | 5mm ~ 120 mm |
Thickness |
6 MM – 25MM
|
Width |
Up to 3000 mm
|
Length |
Up to 12000 mm
|
Form |
Foils, Rolls, Coils, Shim Sheet, Plain Sheet, Chequered Plate, Perforated Sheet, Flats, Strip, Blank (Circle), Ring (Flange)
|
Finish |
Cold rolled sheet (CR), Hot rolled plate (HR),SATIN (Met with Plastic Coated), 2D, 2B, BA NO(8),
|
Hardness |
Half Hard, Soft, Hard, Quarter Hard, Spring Hard etc.
|
Applications | Cutting Edges, Front loaders, Dump Truck Liners, Buckets. |
Grade |
500 BHN PLATE (HARDOX 500), 600 BHN PLATE (HARDOX 600)
|
We can supply Hardox 500 Abrasion Resistance Plate cut to length, slit to width, polish and plate profile forms to meet customer specific requirements. We provides Hardox 600 Wear Plate plasma and oxy cutting.
Hardox 500/ 600 Plate |
Price
|
Hardox 500 Hardox 600 Wear-Resistant Steel Plate | ₹ 42,870.97-₹ 1,21,598.96 / Ton |
Hardox 500 600 steel plate | ₹ 42,870.97-₹ 1,21,598.96 / Ton |
customized hardox 500 600 25 mm plate | ₹ 42,870.97-₹ 1,21,598.96 / Ton |
Customized Services Hardox 500 600 Wear Steel Plate | ₹ 44,373.96-₹ 48,668.22 / Tons |
Hardox 500/600 large stock good sale plate for construction | ₹ 85,885.08-₹ 1,35,984.71 / Ton |
prime quality abrasve resistant steel plate 4×8 Hardox 500 /600 price | ₹ 71,570.90-₹ 82,306.54 / Ton |
hot rolled hb500 heat Ar500 nm500 wear resistant hardox 600price steel plate | ₹ 42,942.54-₹ 71,570.90 / Ton |
Hardox 500 wear resistant steel plate | ₹ 93,042.17-₹ 94,831.45 / Metric Ton |
12mm 14mm 16mm Hardox 500 wear resistant steel plate | ₹ 47,952.51-₹ 69,423.78 / Ton |
Please note this is an approx Hardox 500 Plate Price in India. For final Hardox 600 Plate Price list please mail us.
Hardox 500 Plate
QUARD 500 Plate
JFE EVERHARD 360LE Plate
SUMIHARD K500 Plate
ABRAZO 500 Plate
RAEX 500 Plate
DILLIDUR 500V Plate
XAR 500 Plate
BRINAR 500 Plate
FORA 500 Plate
HARDPLAST 380 Plate
NICRODUR 500 Plate
Abrex 500 Plate
WELHARD 500 Plate
Rockstar 500 Plate
Rockstar 600 Plate
Abrex 600 Plate
BIS 600 Plate
BIS 500 Plate
AR500 Plate
Brand
|
Manufacture/Co
|
HARDNESS RANGE
|
C.E.V. Typical Values
|
Values for AR 500
|
Thk: 10 – 20
|
||
Hardox 500
|
SSAB
|
370-430
|
0.37
|
QUARD 500
|
DUFERCO
|
370-430
|
0.42
|
JFE EVERHARD 360LE
|
JFE STEEL CORPN.
|
360-430
|
0.38
|
SUMIHARD K500
|
SUMITOMO METALS
|
500-440
|
0.46
|
ABRAZO 500
|
TATA UK LTD.
|
360-430
|
0.43
|
RAEX 500
|
RUUKKI
|
360-430
|
0.43
|
DILLIDUR 500V
|
DILLINGER HUTTE
|
370-430
|
0.43
|
XAR 500
|
THYSSEN KRUPP
|
370-430
|
0.43
|
BRINAR 500
|
ILSENBURGER GROBBLECH
|
360-430
|
0.48
|
FORA 500
|
INDUSTEEL
|
360-430
|
0.48
|
HARDPLAST 380
|
ISD HUTA
|
360-430
|
0.56
|
NICRODUR 500
|
ACRONI
|
360-430
|
0.56
|
CREUSABRO 4800
|
INDUSTEEL
|
360-430
|
0.48
|
WELHARD 500
|
NSC/JAPAN
|
500-440
|
0.46
|
BIS Plate 320
|
Bisalloy Steels Pty Ltd
|
320-360
|
0.4
|
BIS Plate 500
|
Bisalloy Steels Pty Ltd
|
370-430
|
0.4
|
BIS Plate 600
|
Bisalloy Steels Pty Ltd
|
425-475
|
0.48
|
Rockstar 500
|
Essar Steel India Ltd.
|
370-430
|
0.45
|
Rockstar 600
|
Essar Steel India Ltd.
|
425-475
|
0.52
|
Rockstar 500
|
Essar Steel India Ltd.
|
600-540
|
0.6
|
Abrex 500
|
NSSMC
|
360-440
|
0.4
|
Abrex 600
|
NSSMC
|
410-490
|
0.5
|
Abrex 500
|
NSSMC
|
600-550
|
0.55
|
Abrex 600
|
NSSMC
|
550-650
|
0.73
|
1/8″ | 3/8″ | 3/4″ | 1-1/2″ | 3″ |
3/16″ | 1/2″ | 1″ | 2″ | 4″ |
1/4″ | 5/8″ | 1-1/4″ | 2-1/2″ | |
*1/8″ thick plate is available in one size only 60″x 120″. The 3/6″ thick plate is available only as 48″ x 144″ and 96″ x 144″. |
Thickness
|
Width
|
Length
|
4
|
2000
|
6000
|
5
|
2000
|
6000
|
6
|
2000
|
6000
|
6
|
2500
|
6000
|
8
|
2000
|
6000
|
8
|
2500
|
6000
|
10
|
2000
|
6000
|
12
|
2000
|
6000
|
15
|
2000
|
6000
|
16
|
2000
|
6000
|
20
|
2000
|
6000
|
25
|
2000
|
6000
|
32
|
2000
|
6000
|
40
|
2000
|
6000
|
50
|
2000
|
6000
|
60
|
1800
|
3500
|
Abrasion Resistant Steel (HARDOX 500) Plates | Abrasion Resistant Steel Plates / 600 BHN Plates |
500 BHN Plate Exporter mumbai | HARDOX 600 Plate Supplier mumbai |
HARDOX 500 Corrosion Resistant Steel Plates | CREUSABRO 600 Plates Dealer mumbai |
ABREX 500 Pressure Vessel Plates | Boiler Quality JFE EH 500 Plates |
ROCKSTAR 500 Boiler Steel Plates | AR 600 Hardness Plates Stockist |
500 BHN Abrasion Resistant Steel Plates | ABREX 600 Pressure Vessel Plates |
500 BHN Plates (HARDOX 500) | 600 BHN Steel Plates Stockist mumbai |
Wear Plates Hardox 500 Exporter | HBW 600 Boiler Steel Plates Stockist |
EN 10051 Wear Resistant Plates | XAR 600 Hardox Wear Plate mumbai |
SUMIHARD 500 Pressure Vessel Steel Plates | 600 BHN Hot Rolled Medium Tensile Structural Steel Plates |
Wear Resistant EN 10051 Steel Plates | (HARDOX 600) Structural Steel Plates Distributor |
High Tensile RAEX 500 Steel Plates Exporter | SWEBOR 600 Plates Stockist |
FORA 500 Hardox wear Plate Stockholder | SAILMA 410 High Tensile Steel Plates |
Corrosion Resistant DUROSTAT 500 Steel Plates | HB 600 Plates Stockholder mumbai |
NICRODUR 500 Boiler Quality Plates Dealer | DILLIDUR 600 Wear Plates mumbai |
Hot Rolled Medium Tensile Structural Steel Plates | QUARD 600 Plates Suppliers mumbai |
Abrasion Resistant ABRAZO 500 Steel Plates | RAMOR 600 Pressure Vessel Steel Plates |
Hot Rolled Low Tensile Structural Steel Plates | Hot Rolled Low Tensile JFE EH 360 Plates |
We maintains an extensive inventory of hardox 500 wear plate, hardox 600 plate for sale in Mumbai, India
All india metal corporation is an ISO certified stockist and supplier of Hardox 500 Steel Plate with a wide product range, Reliable Traders, Exporters and Effective Sourcing. 35 Years of Experience of supplying Abrex 600 Plate
|
|
- Rautaruukki – Finland
- SSAB – Sweden
- Kobe Steel – Japan
- Japan Steel – Japan
- ThyssenKrupp Steel – Germany
- Salzgitter Mannesmann – Germany
- JFE Steel – Japan
- Sumitomo Metal – Japan
- Dillinger Hutte – Germany
- ThyssenKrupp Stahl – Germany
- InduSteel – France
- Nippon Steel – Japan
- Voestalphine Grobblech – Austria
- Corus – U.K
- InduSteel – Belgium
Suppliers & exporter of mill condition plate such as Welding Hardox 600 Plate, sheet and strip for pressure vessels and for general applications.
Plate | C | Si | Mn | P | S | Cr | Ni | Mo | B | CEV | CET |
thickness mm | max % | max % | max % | max % | max % | max % | max % | max % | max % | typv | typv |
04/13/13 | 0.27 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 0.25 | 0.25 | 0.004 | 0.49 | 0.34 |
(13)-32 | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 0.5 | 0.3 | 0.004 | 0.62 | 0.41 |
(32)-40 | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 1 | 0.6 | 0.004 | 0.64 | 0.43 |
(40)-80 | 0.3 | 0.7 | 1.6 | 0.025 | 0.01 | 1.5 | 1.5 | 0.6 | 0.004 | 0.74 |
HARDOX 600 Chemical Compositiom |
|||||||||||
Plate |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
B |
CEV |
CET |
thickness mm |
max % |
max % |
max % |
max % |
max % |
max % |
max % |
max % |
max % |
typv |
typv |
8-30 |
045 |
0.7 |
1.00 |
0.015 |
0.01 |
1.2 |
2.5 |
0.8 |
0.004 |
0.73 |
0.55 |
(30)-50 |
0.47 |
0.7 |
1.00 |
0.015 |
0.01 |
1.2 |
2.5 |
0.8 |
0.004 |
0.84 |
0.59 |
Mechanical properties of HARDOX 600 |
||||
Grade |
Mechanical Property |
Charpy V Impact Test |
||
HADOX 600 |
HBW |
Elongation |
Degree |
longitudinal |
Min Mpa |
Min % |
-40 |
J |
|
570-640 |
10 |
20 |
Grade | Mechanical Property | Charpy V Impact Test | |||
HADOX 500 | HBW Thickness/Mpa | Elongation | Degree | longitudinal | |
4-32MM | 470-530 | Min % | -40 | J | |
(32)-80 | 450-540 | 10 | 40 |
Brand
|
Manufacture/Co
|
Country
|
Hardness Range
|
Value for Hardox 500
|
|||
Hardox 500 /600
|
SSAB
|
Sweden
|
470-530
|
Thickness mm
|
4.0 – 13.0
|
3.1 – 19.9
|
20.0 – 39.9
|
40.0 – 103.0
|
Max CET(CEV)
|
0.38 (0.53)
|
0.43 (0.64)
|
0.45 (0.66)
|
0.47 (0.75)
|
Typ CET(CEV)
|
0.37 (0.51)
|
0.41 (0.63)
|
0.41 (0.63)
|
0.43 (0.72)
|
- EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate
- NACE MR-0175 / ISO 15156
- NACE MR-01-03 / NACE MR-01-75 / ISO 15156
- CE Marked, European Pressure Equipment Directive PED-97/23/EC
- AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008
- with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register)
- GL (Germanischer Lloyd), BV (Bureau Veritas)
- DNV (Det Norske Veritas)
- ABS (American Bureau of Shipping)
- SGS
- TUV
- RINA
- IRS
- NORSOK Approved Standard M-630, M-650 Rev.3
- hardox 500 steel plate Cutting
- Hardox 500 Wear Plate Forming Drilling
- hardox 600 steel plate Machining
- Hardox 500 Abrasion Resistant Plate Grinding
- Hardox 500 Steel Plate Testing
- hardox 600 wear plate used for Dump Truck Bodies
- hardox 500 abrasion Resistant Plate used for Crushers
- hardox 600 Wear Resistant Plate used for Mining
- hardox 500 plate used for Hoppers & Cathces
- hardox 600 wear plate used for Cutting Edges
- abrex 500 plate used for Bulldozers Blades
- abrex 600 Plate used for Quarry Trucks
- AR500 plate used for Loading Buckets